Inside the factory
Specifier's reference - the specification notes we wish every drawing had
Six sections for architects, designers and procurement teams specifying stone from China. Written from order experience, not a catalogue.
Surface finish selection
Polished for vertical drama and low-wear positions; honed for floors, stairs and everything touched daily. Flamed and bush-hammered for exterior grip; brushed and leathered where sheen must disappear. Ask for the same material in two finishes before locking a specification - the difference is not subtle.
Colour selection and batching
Natural stone varies by quarry bed, not by brochure. Batches are allocated per visual zone - one bed per field, transitions at door lines. For any order above 100 m2 we shoot the block run and hold the REF photos; you approve the batch, not a memory of a showroom.
Thickness and slab dimensions
Standard slabs run 240x120 cm and 260x130 cm; thicknesses 18, 20 and 30 mm with cut-to-size to drawing. Treads, landings and thick vanities are fabricated on the same lines - specify early so the cutting plan respects the block.
Sealing and maintenance
Calcite families (marble, onyx, limestone) are acid-sensitive: pH-neutral cleaning on the maintenance sheet and penetrating sealer at handover. Silicate families (granite, quartzite) are far more forgiving. We include a care sheet per material family with every order.
Grade classification
Commercial grade is the volume product - honest, consistent, value-priced. Select grade (G1) commands tighter colour bands and first-choice blocks for feature positions. We declare the grade per lot on the REF quotation - no silent substitution.
Project scale and MOQ
Full 20ft containers are the economic unit (roughly 200-250 m2 depending on thickness). Smaller trials ship LCL. Custom fabrication starts from a single slab worth of pieces; the practical MOQ depends on cut sizes and packing.
Have a drawing? Test it against our cutting plan
Standards: GB/T, ASTM and EN in one line each
Chinese production runs to GB/T (marble building slabs GB/T 19766, granite slabs GB/T 18601) covering dimensions, flatness, angle and appearance grading. Where your specification cites ASTM C615/C503 or EN 12058/1341, send it with the drawing - we map the acceptance criteria onto the GB/T inspection sheet and report against both, so the receiving inspection has one document.