Stone Knowledge Center
Onyx Backlit Walls: Panel Thickness, Lighting and Care
Onyx is translucent - that is the whole point. Practical notes on panel thickness, LED spacing and long-term care from a workshop that books onyx every week.
Bookmatched green onyx - backlit feature wall panelsNo natural stone sells a hotel lobby like backlit onyx. It is also the stone most often ruined by wrong thickness, wrong lighting temperature or a missing service plan. Three things decide whether the wall looks premium on day 1000, not just day 1.
Panel thickness: translucent, not fragile
For backlighting we cut onyx to 15-20 mm - thin enough to transmit light evenly, thick enough to handle fabrication and shipping. Below 15 mm the panels need a honeycomb backing; above 25 mm transmission drops and hot spots appear. Large panels travel in a plywood sandwich crate with edge protectors; onyx is packed softer than granite because the failure mode is flex, not impact.
Book-matching first, lighting second
Backlit onyx is bought as a book-match: two consecutive slabs opened like a mirror. We photograph the opened pair under studio light before crating and send it for approval - lighting design then works from those photos. LED spacing behind 15-20 mm onyx lands at 100-150 mm with a diffusion layer; warm white 2700-3000 K suits gold and honey onyx, neutral 4000 K suits green and white varieties. Dimmable drivers are worth the cost - the wall doubles as mood lighting.
Care: the plan nobody writes
Onyx is calcite: it etches with acids and scratches more readily than marble. On backlit feature walls the exposure is vertical and mostly safe, but specify a penetrating sealer at handover, prohibit acidic cleaners on the maintenance sheet, and keep one spare panel per project - we hold REMAIN slabs tagged to the project REF for 24 months for exactly this.
Quick answers
How thick should onyx be for a backlit wall?
15-20 mm is the working range. Thinner needs honeycomb backing; thicker transmits less light and shows hot spots over the LED strips.
What LED spacing works behind onyx panels?
100-150 mm strip spacing with a diffusion layer, warm 2700-3000 K for gold and honey tones, 4000 K for green and white. Always dimmable drivers.
Can onyx be used on countertops?
Yes, with eyes open: sealed, maintained, and accepted as a showpiece surface rather than a work surface. Honeycomb-backed 15 mm onyx over a stable substrate is the common build.
Planning a project?
Send your BOQ, drawing or a photo of the sample you are matching. We reply with a REF-numbered quotation, packing plan and current lead time - typically within one working day.