Stone Knowledge Center
Natural Stone Stair Treads: Types, Thickness & Specifications
Tread sizing, edge profiles, anti-slip treatment and packing practice for exported stair sets - based on what actually survives container shipping.
G654 basalt treads - grooved, exported in matched setsStair treads are the component most often damaged in transit and most often re-ordered. The cause is rarely the stone - it is specification drift between the drawing and the cutting list. This guide sets out the parameters we confirm before cutting a single tread.
Standard sizing
Interior stone stairs typically run 1000-1200 mm treads with 280-320 mm depth and 30 mm thickness; landings are cut to the drawing. Exterior steps in granite run 500-600 mm depth for comfort, usually 50-60 mm thick. Riser height is decided by the staircase structure, not by the stone - we cut to the survey drawing after the stair carcass exists, not before.
Edge profiles and anti-slip treatment
Bullnosed and half-bullnosed edges dominate hotel and residential work. Public and outdoor projects usually add 2-3 anti-slip grooves on the front 40 mm of the tread - a detail worth specifying in the drawing because retrofitting grooves after polishing is charged as rework. Flamed + brushed finishes add grip on exterior granite; honed marble interiors rely on the grooves instead.
Matched sets and numbering
Every tread in a flight is cut from one block run so the veining steps continuously. We number each piece - TR-01, TR-02 - on the back, and the packing list mirrors the numbers. On site the installer follows the sequence instead of hunting for matches.
Packing that survives the journey
Treads travel in face-to-face pairs with foam interlayers, crated vertically in bundles of 8-12, straps on wood not stone. Sets for one flight stay in one crate - mixing flights in a crate is how mix-ups happen. Our packing team photographs every crated bundle against the packing list before the container closes.
Quick answers
What thickness do interior marble stair treads need?
30 mm is standard for treads up to 1200 mm span; landings and cantilevered steps go 40-50 mm. Thinner panels flex under footfall and crack at the nose over time.
Can treads and risers come from the same block?
Yes - and they should. We cut treads and risers as one block run so grain continues across the step line. That is a cutting-plan decision, made before production.
How are stair sets packed for container shipping?
Face-to-face in foam, vertical in crated bundles, one flight per crate, all pieces numbered against the packing list. Photos are taken before loading.
Planning a project?
Send your BOQ, drawing or a photo of the sample you are matching. We reply with a REF-numbered quotation, packing plan and current lead time - typically within one working day.